Skip to content
- Steering Box
- Stock type Steering box only
- S type with OEM rack and pinion may use OEM rack and pinion
- Must be in stock location
- Steering shaft
- Must use two u-joints on the steering shaft, unless collapsible shaft is used.
- Connection at steering box must be changed to a solid U-joint, (no rubber).
- A quick release coupling on steering wheel is mandatory.
- Center of steering wheel must be padded with 2″ fire resilient material
- Idler arm
- Stock or OEM type adjustable replacement for frame may be used.
- Pitman arm
- Stock OEM for frame being used
- Center drag link
- Stock or OEM type -bump steer correction -adjustable replacement center drag link may be used.
- Inner and Outer Tie Rod Ends / Sleeve
- Heim joints may replace tie rod ends
- Aftermarket sleeve may replace stock OEM sleeve
